This article outlines the steps for ragging out items which removes them from the active inventory on the Laundris platform.
Ragout is the process of removing active items from the Laundris platform so they can be taken out of circulation. Property customers are responsible for performing ragout, and this process should be done on a regular basis as a best practice for inventory management.
RFID Ragout Using a Handheld Scanner
- Step 1: Log in with your email and password and connect to a handheld scanner if necessary.
For instructions on connecting a handheld scanner, please reference the Connecting to a Scanner knowledge article in the Help Center.
- Step 2: Decrease the power level to 10 dBm or lower by tapping on the gear icon
in the right corner of the app, then adjust the scanner power slide bar. Next, isolate yourself and the items selected for ragout from existing active inventory.
Please Note: It is important to reduce the power level on the scanner and isolate yourself to ensure that acceptable inventory is not inadvertently ragged out and removed from the Laundris platform.
- Step 3: Tap the RFID Ragout option in the app.
- Step 4: Tap the scan icon
then scan the selected items for ragout. Write a note if applicable (Biohazard, Damaged, etc). - Step 5: Before tapping Submit, count the items and ensure the scanned count matches your manual count.
The RFID Ragout process has now been completed!
RFID Ragout Using the Web Portal
- Step 1: Log into the appropriate link below:
- Property Module
- Facility Module
- Enter your email and password then select Sign In.
- Step 2: Under the Facility Operations or Housekeeping Operations menu, select the option for RFID Ragout.
- Step 3: Click Add RFID Ragout.
- Step 4: Select the Side (Facility for rental items or Customer for customer owned goods), and Customer Name, then click Add Items with Portal Scanner and select the portal.
Note: If you are performing commissioning through the Property Module, you will not need to select the Side.
- Step 5: After initiating the scan, the RFID Tag IDs field will be populated with the items being ragged out. Click Add RFID Ragout.
